Special aspects of creating information environment for digital (SMART) certification of pipeline transportation equipment

UDK: 681.518:622.622.4

DOI: 10.24887/0028-2448-2025-7-142-145

Key words: SMART-standard, certification, conformity assessment, SMART-certification, SMART-format, information system

Authors: O.V. Aralov (The Pipeline Transport Institute LLC, RF, Moscow); S.I. Viunov (The Pipeline Transport Institute LLC, RF, Moscow); V.Yu. Tuzov (The Pipeline Transport Institute LLC, RF, Moscow); A.N. Sharypov (The Pipeline Transport Institute LLC, RF, Moscow)

There is a need for digitalization of the industry system for product conformity assessment used by Transneft PJSC by automating the verification of compliance with the requirements of regulatory documents (RD) and technical documents (TD) of product manufacturers. The compliance of equipment with the requirements of RD shall be confirmed using digital (SMART) certification. SMART-certification requires the development of relevant subsystems and software modules enabling the use of RD and TD in SMART-format. The modernization of the Information System for Regulatory Document Management (ISRDM) should involve the development of a digital certification subsystem, including a module for creating the templates of TD SMART-versions and a module for SMART-analysis of product manufacturers’ TD. TD SMART-versions should be formed by selecting from the list and filling the previously created templates of TD SMART-versions. TD SMART-versions will be generated in a template filling tool of the Core Product Automated Control System (CP ACS). Mutual integration of ISRDM and CP ACS will enable to transfer the templates of TD SMART-versions from ISRDM to CP ACS with their placement in an open resource for filling data by third-party users in the template filling service. One of the essential requirements for creating an information environment for the SMART-certification is that the templates of TD SMART-versions created in ISRDM and the TD SMART-versions generated in CP ACS should comply with PNST 864-2023 «Smart (SMART) standards. General provisions». The paper addresses the all aspects of creating a digital certification subsystem in ISRDM.

References

1. Aralov O.V. et al., Automatic control of processes for products conformity assessment applied in Transneft (In Russ.), Nauka i tehnologii truboprovodnogo transporta nefti i nefteproduktov = Science & Technologies: Oil and Oil Products Pipeline Transportation, 2018, V. 8, no. 4, pp. 426–435, DOI: https://doi.org/10.28999/2541-9595-2018-8-4-426-435

2. V’yunov S.I., Aralov O.V., Tuzov V.Yu., Investigation of the possibility to create a SMART standard of the GS type of Transneft PJSC and subsequent SMART certification of equipment (In Russ.), Nauka i tehnologii truboprovodnogo transporta nefti i nefteproduktov = Science & Technologies: Oil and Oil Products Pipeline Transportation, 2024, V. 14, no. 5, pp. 470–480, DOI: https://doi.org/10.28999/2541-9595-2024-14-5-470-480

3. V’yunov S.I., Buyanov I.V., Kontseptsiya tsifrovogo razvitiya sistemy upravleniya kachestvom produktsii v truboprovodnom transporte nefti i nefteproduktov (The concept of digital development of the quality management system for products in pipeline transportation of oil and oil products), Proceedings of XIX International scientific and practical conference “Truboprovodnyy transport – 2024” (Pipeline Transport – 2024), Ufa, 20–22 November 2024, V. 1, pp. S. 225–227.

4. “TechExpert”: the path to SMART standards (In Russ.), Ekspozitsiya Neft’ Gaz, 2022, no. 5(90), pp. 80–81.

5. Dmitrieva S.Yu., Basic principles for SMART standards development (In Russ.), Standarty i kachestvo, 2021, no. 12(1014), pp. 22–25.

6. Artemova V.R., Dmitrieva S.Yu., Techexpert SMART: Creating documents in smart format (In Russ.), Standarty i kachestvo, 2023, no. 3(1029), pp. 48–53.

7. AO “Kodeks”: Promyshlennost’ nuzhdaetsya v umnykh standartakh («Kodeks» JSC: Industry needs smart standards), 2021, URL: https://kodeks.ru/news/read/promyshlennost-nujdaetsya-v-umnyh-standartah

8. Sysoeva E.A., Rozhkova T.A., Digital technologies in the products conformity assessment (In Russ.), Kompetentnost’, 2019, no. 8, pp. 20–25.

9. Unguryan E., SMART standards (In Russ.), Standarty i kachestvo, 2021, no. 12, pp. 26-28.

10. Kolmykov E.A., Vorontsova Yu.V., Vorontsova A.N., How to go to smart (machine-readable) standards (In Russ.), Izvestiya VolgGTU, 2022, no. 1, pp. 17–20,

DOI: https://doi.org/10.35211/1990-5297-2022-1-260-17-20

11. Loibl A., Manoaran T., Nagarajan A., Procedure for the transfer of standards into machine-actionability, Journal of Advanced Mechanical Design, Systems, and Manufacturing, 2020, V. 14, no. 2, DOI: https://doi.org/10.1299/jamdsm.2020jamdsm0022

12. Ehring D., Luttmer I., Pluhnau R., Nagarajah A., SMART standards – concept for the automated transfer of standard contents into a machine-actionable form, Proceedings of 31st CIRP Design Conference 2021 (CIRP Design 2021), DOI: https://doi.org/10.1016/j.procir.2021.05.025