Results of research for improving well-killing technology

UDK: 622.276.7
Key words: well-killing fluid, well test, geological-physical conditions, permeability coefficient of restitution, laboratory research
Authors: I.N. Ponomareva, P.Yu. Iluishin, A.V. Lekomtsev, D.A. Martyushev, R.M. Rakhimzyanov (Perm National Research Polytechnic University, RF, Perm)
This article describes how to find some new well-killing fluids for a variety of geological and physical conditions of the Perm region, having a positive experience of practical application in other regions of Russia. Interaction of fluids well jamming with rock-forming minerals and the formation fluids often leads to a deterioration in the filtration reservoir characterization in the invaded zone. As a result, the process is complicated by the well output to the regime, it reduces productivity and performance. We consider examples of the wells in which production decline was probable cause for the negative impact of well-killing fluid on the filtration characteristics of the rock. Comparison of the properties and state of formation zone determined using pressure-processing, obtained before and after the repair. The properties of the remote formation zone determined by standard methods of diagnosis and isolation fracture parameters - by the method of Warren - Ruth, the parameter estimation zone - based on the method of deterministic pressure moments. In laboratory experiments conducted filtration and research in the free volume 5 different damping fluid, which allowed to identify the most effective ones for the conditions of the specific objects of oil deposits of the Perm region. According to the results of laboratory tests in the void volume it found that all damping fluid is inert to the clay minerals and the formation fluids, and does not influence the preparation process oil, and does not cause corrosion of the pipeline equipment intensive. The main criterion for the effectiveness of well-killing fluids adopted the coefficient of permeability recovery. It was found that the investigated damping fluid show quite different results in different geological and physical conditions of the Perm region, which confirms the need for their individual choice in the planning stage repair of wells, taking into account the real geological and physical properties.

References

1. Zeygman Yu.V., Fizicheskie osnovy glusheniya i osvoeniya skvazhin (Physical

fundamentals of killing and development of wells), Ufa: Publ. of USPTU, 1996,

78 p.

2. Basarygin Yu.M., Bulatov A.I., Proselkov Yu.M., Tekhnologiya kapital’nogo

i podzemnogo remonta neftyanykh i gazovykh skvazhin (The technology

of oil and gas well servicing and workover), Krasnodar: Sovetskaya Kuban’

Publ., 2002, 584 p.

3. Ilyushin P.Yu., Rakhimzyanov R.M., Solov’ev D.Yu., Kolychev I.Yu., Analysis

of well intervention aimed at oil production enhancement in the Perm

krai􀀀s fields (In Russ.), Vestnik Permskogo natsional’nogo issledovatel’skogo

politekhnicheskogo universiteta. Geologiya. Neftegazovoe i gornoe delo

= Bulletin of Perm National Research Polytechnic University. Geology. Oil &

Gas Engineering & Mining, 2015, no. 15, pp. 81–89.

4. Cherepanov S.S., Chumakov G.N., Ponomareva I.N., Results of applying

acidic hydraulic fracturing with proppant in the Tournaisian-Famennian reserves

at the Ozernoe field (In Russ.), Vestnik Permskogo natsional’nogo

issledovatel’skogo politekhnicheskogo universiteta. Geologiya. Neftegazovoe

i gornoe delo = Bulletin of Perm National Research Polytechnic University.

Geology. Oil & Gas Engineering & Mining, 2015, no. 16, pp. 70–76.

5. Karnaukhov M.L, P’yankov E.M., Sovremennye metody gidrodinamicheskikh

issledovaniy skvazhin (Modern methods of well test), Moscow: Infra-

Inzheneriya Publ., 2010, 432 p.

6. Erofeev A.A., Ponomareva I.N., Mordvinov V.A., Processing features of recovery

curves of pressure in wells of the carbonate collector with high-viscosity

oil (In Russ.), Neftyanoe khozyaystvo = Oil Industry, 2010, no. 10,

pp. 113–115.

7. Buzinov S.N., Umrikhin I.D., Issledovanie neftyanykh i gazovykh skvazhin i

plastov (The study of oil and gas wells and reservoirs), Moscow: Nedra

Publ., 1984, 269 p.

8. Chernov B.S., Bazlov M.N., Zhukov A.I., Gidrodinamicheskie metody issledovaniya

skvazhin i plastov (Well testing), Moscow: Gostoptekhizdat Publ.,

1960, 160 p.

9. Cherepanov S.S., Integrated research of carbonate reservoir racturing

by Warren – Root method using seismic facies analysis (evidence from tournaisian-

famennian deposit of Ozernoe field) (In Russ.), Vestnik Permskogo

natsional’nogo issledovatel’skogo politekhnicheskogo universiteta. Geologiya.

Neftegazovoe i gornoe delo = Bulletin of Perm National Research

Polytechnic University. Geology. Oil & Gas Engineering & Mining, 2015,

no. 14, pp. 6–12.

10. Magadova L.A., Cherygova M.A., Research and development of wellkilling

and flushing fluid for wells with abnormally low reservoir pressure

(ALRP) (In Russ.), Tekhnologiya dobychi i ispol’zovaniya uglevodorodov,

2014, no. 4.(3). – http://tp-ning.ru/img/04/01.pdf

11. Demakhin S.A. et al., Well killing by block packs - effective means of

preserving the filtration properties of productive formation (In Russ.), Neft’ i

kapital, 2014, no. 9 (214), pp. 68–69.

12. Vagina T.Sh., Gavrilov A.A., Development of blocking compositions for

well killing at the Western Siberian fields with account of modern requirements

(In Russ.), Stroitel’stvo neftyanykh i gazovykh skvazhin na sushe i na

more, 2014, no. 6, pp. 38–41.



Attention!
To buy the complete text of article (Russian version a format - PDF) or to read the material which is in open access only the authorized visitors of the website can. .