The determination of hydrocarbon saturation in oil reservoirs plays a significant role in the management and selection of enhanced oil recovery (EOR) methods. Tracer tests to measure residual oil saturation in the near-wellbore zone (SWCTT) before and after EOR involve injecting tracer into the reservoir and monitoring its recovery for quantification and analysis. The most important issues to address when planning SWCTT are the proper selection of primary tracers with a predetermined shut-in time for controlled secondary tracer generation. Based on the extensive field data, it is known that from 10 to 50 % of the primary tracer should be hydrolyzed at the wellhead during reverse production in order to be able to detect tracers during reverse production and best interpretation of production concentration profiles in the next stages of the study. In this regard, this paper proposes a new analytical approach to determining the well shut-in time during SWCTT after injection of tracer banks in target oil saturation intervals. This method was verified at the object of surfactant-polymer flooding (oilfield in Eastern Europe) and showed its efficiency, as evidenced by the obtained tracer production profiles, on the basis of which the average value of residual oil saturation (0,109) after injection of surfactant-polymer composition was calculated, which is a successful result for chemical flooding.
References
1. Silva M., Stray H., Bjørnstad T., Studies on new chemical tracers for determination of residual oil saturation in the inter-well region, SPE-185085-MS, 2017,
DOI: https://doi.org/10.2118/185085-MS
2. Bolotov A.V., Anikin O.V., Bondar’ M.Yu. et al., Faktory, vliyayushchie na podbor i primenimost’ trasserov v odnoskvazhinnom khimicheskom trassernom teste (Factors affecting the selection and applicability of tracers in a single-hole chemical tracer test), Kazan: Publ. of KFU, 2024, 206 p.
3. Wang S., Shiau B., Harwell J.H., Effect of reservoirs conditions on designing single-well chemical tracer tests under extreme brine conditions, Transp. Porous Med., 2018, V. 121, DOI: https://doi.org/10.1007/s11242-017-0934-9
4. Huseby O., Sagen J., Dugstad Ø., Single well chemical tracer tests fast and accurate simulations, SPE-555608-MS, 2012, DOI: http://doi.org/10.2118/155608-MS
5. Bondar M., Osipov A., Groman A. et al., Evaluating efficiency of surfactant-polymer flooding with single well chemical tracer tests At Kholmogorskoye field, SPE-207314-MS, 2021, DOI: http://doi.org/10.2118/207314-MS
6. Keller Yu.A., Uskov A.A., Krivoguz A.N. et al., The application of SWCTT for evaluating the efficiency of low-salinity water flooding at the carbonate reservoir of the Kharyaginskoye oil field (In Russ.), Neftyanoe khozyaystvo = Oil Industry, 2020, no. 7, pp. 109-113, DOI: https://doi.org/10.24887/0028-2448-2020-7-109-113
7. Volokitin Y., Shuster M., Karpan V. et al., Results of alkaline-surfactant-polymer flooding pilot at West Salym field, SPE-190382-MS, 2018,
DOI: https://doi.org/10.2118/190382-MS
8. Buijse M.A., Prelicz R.M., Barnes J.R., Cosmo C., Application of internal olefin sulfonates and other surfactants to EOR. Part 2: The design and execution of an ASP field test, SPE-129769-MS, 2010, DOI: https://doi.org/10.2118/129769-MS
9. Bondar M.Yu., Osipov A.V., Groman A.A. et al., The method for selecting the chemical composition for surfactant-polymer flooding and field evaluation of the effectiveness of its application at the Kholmogorskoye field (In Russ.), Neftyanoe khozyaystvo = Oil Industry, 2022, no. 9, pp. 100–105, DOI: https://doi.org/10.24887/0028-2448-2022-9-100-105
10. Khaledialidusti R., Kleppe J., A comprehensive framework for the theoretical assessment of the single-well-chemical-tracer tests, J. Pet. Sci. Eng., 2017, V. 159,
pp. 164–181, DOI: https://doi.org/10.1016/j.petrol.2017.09.027
11. Doorwar S., Tagavifar M., Dwarakanath V., A 1D analytical solution to determine residual oil saturations from single-well chemical tracer test, SPE-200420-MS, 2020, DOI: https://doi.org/10.2118/200420-MS
12. Bragg J., Carlson L., Atterbury J., Recent applications of the single well tracer method for measuring residual oil saturation, SPE–5805-MS, 1976,
DOI: https://doi.org/10.2118/5805-MS
13. Mechergui A., Romero C., Morel D., Feasibility study of single well tracer test for high salinity and high temperature reservoirs, SPE–161618-MS, 2012,
DOI: http://doi.org/10.2118/161618-MS
14. Anikin O.V., Bolotov A.V., Mukhutdinova A.R., Varfolomeev M.A., Evaluation of the kinetic and thermodynamic behavior of tracers for their applicability in SWCTT, Processes, 2022, V. 10(11), DOI: http://doi.org/10.3390/pr10112395
15. Mukhutdinova A.R., Bolotov A.V., Anikin O.V., Varfolomeev M.A., Algorithm for estimating boundary conditions of a distributed tracer for application in a single-well tracer test (In Russ.), Georesursy = Georesursy, 2022, V. 24(4), pp. 75–81, DOI: http://doi.org/10.18599/grs.2022.4.6
16. Tang J.S., Partitioning tracers and in-situ fluid-saturation measurements, SPE-22344-PA, 1995, DOI: http://doi.org/10.2118/22344-PA
17. Tang J.S., Harker B., Mass balance method to determine residual oil saturation from single well tracer test data, J. Can. Pet. Technol., 1990, V. 29, pp. 115–124,
DOI: http://doi.org/10.2118/90-02-08
18. Bolotov A.V., Anikin O.V., Bondar M.Y. et al., Novel single well chemical tracer test design: shut-in time determination for test feasibility, Petroleum Science and Technology, 2024, DOI: https://doi.org/10.1080/10916466.2024.2383262
19. Deans H.A., The Single-well chemical tracer method for measuring residual oil saturation, Final Report U.S. Department of Energy Office of Scientific and Technical Information, 1980, pp. 18–26.
20. Soltani A., Decroux B., Negre A. et al., Evaluating the impact of reservoir cooling on the surfactant flood efficiency, IPTC-21351-MS, 2021,
DOI: http://doi.org/10.2523/IPTC-21351-MS
21. Ramey H.J. Wellbore heat transmission, SPE-96-PA, 1962, DOI: https://doi.org/10.2118/96-PA