Логин:
Пароль:
Регистрация
Забыли свой пароль?

Development of process liquid selection method for Orenburg oil and gas field conditions during killing wells process

Authors: А.М. Kunakovа, R.R.Gumerov (Gazpromneft NTC LLC, RF, Saint-Petersburg), E.V. Zagrebelnyi, V.A. Sukovatyj (Gazpromneft Orenburg CJSC, RF, Orenburg), M.K. Rogachev, D.V. Mardashov (National Mineral Resources University (University of Mines), RF, Saint-Petersburg)

Key words: well killing, process fluids, blocking compounds, filtration.

The paper presents the modern selection method of blocking composition which is used during killing of oil and gas wells. This method of selection based on laboratory physical and chemical filtration studies with modeling of gas breakthrough process from bottomhole formation zone. The experiments were carried out in temperature and pressure conditions that are close to the natural reservoir. Core samples from the eastern section of the Orenburg gas field were used.
References
1. Zeygman Yu.V., Fizicheskie osnovy glusheniya i osvoeniya skvazhin (Physical basis of killing and exploration wells), Ufa: Publ. of UGNTU, 1996, 78 p.
2. Rogachev M.K., Strizhnev K.V., Bor'ba s oslozhneniyami pri dobyche nefti (Management of complications during oil production), Moscow: Nedra-Biznestsentr Publ., 2006, 295 p.
3. Rogachev M.K., Mardashov D.V., Strizhnev K.V., Zeygman Yu.V., Neftegazovoe delo – Oil and Gas Business, 2007, V. 5, no. 2, pp. 55-58.
4. Ryabokon' S.A., Tekhnologicheskie zhidkosti dlya zakanchivaniya i remonta skvazhin (Process fluids for completion and workover), Krasnodar, 2009, 337 p.
5. Tokunov V.I., Saushin A.Z., Tekhnologicheskie zhidkosti i sostavy dlya povysheniya produktivnosti neftyanykh i gazovykh skvazhin (Process fluids and compositions for increasing the productivity of oil and gas wells), Moscow: Nedra Publ., 2004, 711 p.

Key words: well killing, process fluids, blocking compounds, filtration.

The paper presents the modern selection method of blocking composition which is used during killing of oil and gas wells. This method of selection based on laboratory physical and chemical filtration studies with modeling of gas breakthrough process from bottomhole formation zone. The experiments were carried out in temperature and pressure conditions that are close to the natural reservoir. Core samples from the eastern section of the Orenburg gas field were used.
References
1. Zeygman Yu.V., Fizicheskie osnovy glusheniya i osvoeniya skvazhin (Physical basis of killing and exploration wells), Ufa: Publ. of UGNTU, 1996, 78 p.
2. Rogachev M.K., Strizhnev K.V., Bor'ba s oslozhneniyami pri dobyche nefti (Management of complications during oil production), Moscow: Nedra-Biznestsentr Publ., 2006, 295 p.
3. Rogachev M.K., Mardashov D.V., Strizhnev K.V., Zeygman Yu.V., Neftegazovoe delo – Oil and Gas Business, 2007, V. 5, no. 2, pp. 55-58.
4. Ryabokon' S.A., Tekhnologicheskie zhidkosti dlya zakanchivaniya i remonta skvazhin (Process fluids for completion and workover), Krasnodar, 2009, 337 p.
5. Tokunov V.I., Saushin A.Z., Tekhnologicheskie zhidkosti i sostavy dlya povysheniya produktivnosti neftyanykh i gazovykh skvazhin (Process fluids and compositions for increasing the productivity of oil and gas wells), Moscow: Nedra Publ., 2004, 711 p.


Attention!
To buy the complete text of article (a format - PDF) or to read the material which is in open access only the authorized visitors of the website can. .

Mobile applications

Read our magazine on mobile devices

Загрузить в Google play

Press Releases

06.12.2019
05.12.2019
04.12.2019