Логин:
Пароль:
Регистрация
Забыли свой пароль?

Reduction of specific expenditures on the well funds complicated by mechanical impurities

UDK: 622.276.53.055
DOI: 10.24887/0028-2448-2018-10-105-107
Key words: filter – input module, unit costs, wire permeable material, optimization, submersible equipment
Authors: S.S. Ulianov (Samaraneftegas JSC, RF, Samara), R.I. Sagyndykov (Samaraneftegas JSC, RF, Samara), D.S. Davydov (Samaraneftegas JSC, RF, Samara), S.A. Nosov (Samaraneftegas JSC, RF, Samara), I.A. Volskaya (Samaraneftegas JSC, RF, Samara), G.G. Gilaev (Samaraneftegas JSC, RF, Samara)

The decrease in the growth of reserves and production is achieved through the use of new or improved technologies and organizational decisions. When evaluating the cost-effectiveness of new service technologies unit costs are a determining factor in the design. According to the instructions of the Russian President in 2017 state-owned companies should provide lower operating costs by at least 2-3% per year, while maintaining the pace of development. Execution of the Russian government directives today is complicated by positive dynamics of growth in unit costs, which requires companies to respond immediately and to develop compensatory measures aimed at changing its vector. For one of the main reasons for their increase is the rising cost of submersible equipment. At the moment the question of finding ways to reduce the cost of construction and reduce the total cost is relevant for all oil and gas companies.

The article offers an innovative design solution, which allows not only save a lot of money to buy equipment, but also reduce operating costs throughout the stages of his tenure, while maintaining all the technical advantages. This solution also makes it possible to preserve the effectiveness and reliability of the downhole pumping equipment operating on complicated fund. Cost optimization and improvement of the technical part of the existing filter - input module and has a significant economic impact, without significant cost of production.

References

1. Garifullin A.R., Basov S.G., Methods for protecting ESP from mechanical impurities (In Russ.), Territoriya “NEFTEGAZ”, 2010, no. 9, pp. 70–73.

2. Bakhtizin R.N., Smol'nikov R.N., Features of oil production with high content of mechanical impurities (In Russ.), Elektronnyy nauchnyy zhurnal Neftegazovoe delo = The electronic scientific journal Oil and Gas Business, 2012, no. 8, pp. 52–55.

3. Donchenko A.M., Pyatov, I.S. Sibirev S.V., Fil'try – vkhodnye moduli s fil'troelementami iz “metallicheskoy reziny”. Osobennosti primeneniya (Filters - input modules with filter elements from "metal rubber". Application features), Proceedings of 9th International Practical Conference “Mekhanizirovannaya dobycha 2012” (Mechanized mining 2012), 2012.

4. Mikhalev E.A., Filters for ESP and SRP produced by RUSELCOM (In Russ.), Inzhenernaya Praktika, 2016, no. 4, pp. 23–24.

The decrease in the growth of reserves and production is achieved through the use of new or improved technologies and organizational decisions. When evaluating the cost-effectiveness of new service technologies unit costs are a determining factor in the design. According to the instructions of the Russian President in 2017 state-owned companies should provide lower operating costs by at least 2-3% per year, while maintaining the pace of development. Execution of the Russian government directives today is complicated by positive dynamics of growth in unit costs, which requires companies to respond immediately and to develop compensatory measures aimed at changing its vector. For one of the main reasons for their increase is the rising cost of submersible equipment. At the moment the question of finding ways to reduce the cost of construction and reduce the total cost is relevant for all oil and gas companies.

The article offers an innovative design solution, which allows not only save a lot of money to buy equipment, but also reduce operating costs throughout the stages of his tenure, while maintaining all the technical advantages. This solution also makes it possible to preserve the effectiveness and reliability of the downhole pumping equipment operating on complicated fund. Cost optimization and improvement of the technical part of the existing filter - input module and has a significant economic impact, without significant cost of production.

References

1. Garifullin A.R., Basov S.G., Methods for protecting ESP from mechanical impurities (In Russ.), Territoriya “NEFTEGAZ”, 2010, no. 9, pp. 70–73.

2. Bakhtizin R.N., Smol'nikov R.N., Features of oil production with high content of mechanical impurities (In Russ.), Elektronnyy nauchnyy zhurnal Neftegazovoe delo = The electronic scientific journal Oil and Gas Business, 2012, no. 8, pp. 52–55.

3. Donchenko A.M., Pyatov, I.S. Sibirev S.V., Fil'try – vkhodnye moduli s fil'troelementami iz “metallicheskoy reziny”. Osobennosti primeneniya (Filters - input modules with filter elements from "metal rubber". Application features), Proceedings of 9th International Practical Conference “Mekhanizirovannaya dobycha 2012” (Mechanized mining 2012), 2012.

4. Mikhalev E.A., Filters for ESP and SRP produced by RUSELCOM (In Russ.), Inzhenernaya Praktika, 2016, no. 4, pp. 23–24.


Attention!
To buy the complete text of article (a format - PDF) or to read the material which is in open access only the authorized visitors of the website can. .

Mobile applications

Read our magazine on mobile devices

Press Releases

16.07.2019
08.07.2019
04.07.2019
SPE 2019
ТАТАРСТАНСКИЙ НЕФТЕГАЗОХИМИЧЕСКИЙ ФОРУМ